E36 E46 BMW super angle kit

Currently the best angle kit on the market, the only one to allow you to make all of the adjustment you could need without removing any bolt!

The e36 and e46 have completely different suspension geometry, the devil is the details and what it comes to is scrub radius, this is why we didn’t cut corners and did get different knuckle machined and top plate.

Bmw e36/e46 super angle kit:

1.    Fully adjustable control arm with the adjustments that can easily be done directly on your vehicle. No need to remove your LCA mounts. Simply loosen the jam nut and turn the custom adjusting bolt as necessary and re-tighten the jam nut.

2.    Additional caster adjustment built into the top plates with a wide range to suit any driving style and car setup

3.    The entire kit engineered to optimize strength while keeping the weight down, to last as long as possible and to make it user friendly at the same time.

4.    Compatible with OEM sway bar and link. If you don’t use a sway bar, the mount can be removed.  5.    Zink plated CNC machined steel knuckle

6.    The knuckle uses our standard Ackermann eccentric washers for ease of adjustment. The knuckle has just enough space to allow clearance for a wrench so you can do your adjustments with the suspension fully assembled.

7.    There are tapered features directly integrated into the knuckle bloc to fit into the OEM knuckle which positively locate it into place. This feature means that you won’t have to re-align your car if you accidently go off course and hit big bumps etc.

8.    High temp all metal lock nuts that are MIL SPEC style and re-usable

9.     High grade hardware included

10.   Self lubricated high strength rod ends and spherical bearings

11.   4130 seamless tube outer tie rod with spherical bearing which reduces the cost of replacing bearings.

12.   Everything is TIG welded

13.   Up to 75 degrees of steering angle